· 

DIY Reclaimed Wood Chair Tutorial With Free Woodworking Plans

Let's build a deck or outdoor chair from reclaimed wood. Yes indeed, I have been inspired by the famous adirondack chair but drew up some plans for my scrap wood on hand. I think these plans would work for pallet or scaffold boards just as well. I added the plan or woodworking instruction as a free download below!

 

As you can see below it all starts by sorting out some wood. I sorted and cleaned it a bit as well as and I had to take out some nails and old screws.  Some of the old screws are still fine and I am going to use them again for this project. But otherwise I did not do much to the timber before I started to measure and mark things up. 

 

 

Building a DIY reclaimed wooden chair with free plans by Heidi Mergl Architect
Sorting and cleaning the reclaimed wood
DIY reclaimed wood chair with free plans to cut the pieces by Heidi Mergl Architect
Using a jigsaw to cut the reclaimed wood for the chair
DIY reclaimed wood chair tutorial with free woodworking plans by Heidi Mergl Architect
I am building this deck chair today from reclaimed wood
Building a DIY reclaimed wooden chair with free plans by Heidi Mergl Architect
Measuring and marking it up to cut the wood to size

 

 

This is all simple cutting so a handheld saw, I used my jigsaw, will do just fine. There was little need for sanding but of course this will depend a bit on the wood you use and maybe I was lucky. 

Of course please take care and use the health and safety guides for your tool.


DIY wood chair with the free plan tutorial by Heidi Mergl Architect
Putting the chair together with wood screws

 

It's time to put it all together but my little plan I drew up so far works lovely. I did not take it to the next level of being totally precise but rather winging it a little. So I did not measure where to put all the screws as you can see on the right but I was rather precise when cutting the boards and paying attention to the angles when putting things together. Of course you can do better by looking out for where to put the screws or even counter sink them. For me and my two handy tools on a bucket and garden table this was just about right and I had fun and feel these plans have been tested for semi-diyers, if there is such a name for us. 

DIY reclaimed wood outdoor chair with free plans by Heidi Mergl Architect
The armrest front detail put together

DIY reclaimed wood chair tutorial with free plans by Heidi Mergl Architect
Cheers all done and it is a nice place to sit

List of tools and materials for this project:

reclaimed wood (I had used 19 boards, 70x7x2cm),  about

60 screws, sanding paper, measuring tape, marker, jigsaw, 

screwdriver and maybe a drill

After about 3 hours, not so much hard work, I am already sitting in my new outdoor chair made from reclaimed wood and partly even from reused screws if you can believe it. 

 

Free plans are below but you will need a PDF reader to open them. Anyhow, have fun building your own!

 

Enjoy, Heidi

DIY Wood Chair Tutorial Made From Reclaimed Wood
Download
Chair Woodworking Plan
Reclaimed wood chair DIY plans
DIY Reclaimed Wood Chair Tutorial by Hei
Adobe Acrobat Document 1.1 MB


Home                     Blog                   

Follow

 

This could interest you too ....

Successfully Tested DIY Hexagon Concrete Coaster Tutorial
Happy Micro Living And Its Design Possibilities
10 Plus Stunning Outdoor Living Space Ideas

Write a comment

Comments: 0